On the way from Buenos Aires to Cordoba I had opportunity to make some fotos of electricity pylons in Argentine out from the bus (colectivo). The majority of the towers are made from concrete, though I saw some traditional lattice towers too. They seem to have a standardized design, which is applicated for pylons, medium voltage towers and electrical substations. Strain towers usually consist of a single concrete pole, while double and triple poles exist for anchor towers.
Fotos 1,2: Transposition for a highway crossing (132 kV)
Foto 3: Single circuit with wire crossbar (132 kV)
Foto 4: 66kV Substation
Foto 5: Single-circuit anchor tower (132 kV)
Foto 6: Roadside pole for medium voltage
Argentijnse hoogspanningsmasten
Argentijnse hoogspanningsmasten
- Bijlagen
-
- betonmast_cordoba1.jpg (308.96 KiB) 627 keer bekeken
-
- betonmast_cordoba2.jpg (585.8 KiB) 627 keer bekeken
-
- betonmast_cordoba3.jpg (582.11 KiB) 627 keer bekeken
-
- betonmast_cordoba4.jpg (1.22 MiB) 627 keer bekeken
-
- betonmast_cordoba5.jpg (395.05 KiB) 627 keer bekeken
-
- betonmast_cordoba6.jpg (456.23 KiB) 627 keer bekeken